Advantages of Turbosand systems over:

• Other rotary sanders.
• Belt Sanding
• Hand Sanding
  

Other rotary sanders:

1. Lowest cost per lineal foot with highest sanding quality provided.
2. Sharp inside corners sanded effectively
3. Most accurate system due to female mold technology.
4. Quickest changeover of abrasive replacements in the industry.
5. Faster, repeatable setups on CNC applications due to extreme accuracy.
6. Does not require readjustment of sanding spindles as others do when the abrasive material wears away.
7. Tubosand is molded to an exact profile. No labor needed to form or glue the abrasive to match the profile.
8. Consistent sanding quality - Turbosand does not dig out the soft grain and ride over the hard grain
9. Turbosand will not burnish or polish the wood, so that it will stain evenly.
10. Does not require a different sanding head/wheel for each profile.
11. No expensive "rubber backers" to replace when worn or damaged.

Belt Sanding:

1. More intricate details can be done than with belts.
2. No form blocks that need maintenance to keep in profile.
3. Less space required on machines - thus lower initial capital investment.
4. Safer to operate - No idlers, pulleys, or air cylinder required. 

Hand Sanding:

1. Tremendous LABOR SAVINGS
2. Consistent sanding quality - No profile distortions; unwanted rounded corners & broken edges.
3. Helps prevent Carpal Tunnel Syndrome

� Copyright 2002 Turbosand, Inc.  All rights reserved.